Honda CB1300 Super Four 2006 Parts

Vertex VP12A-4 AGM Battery YT12A-BS ET12A-BS FT12A-BS GT12A-BS

12 volt 10AH 175 CCA. Length: 150mm x Width: 88mm x Height: 105mm. Replaces: 51021, 511901014, 511901016, CT12A-BS, ET12A-BS, FT12A-BS, GT12...

JT Sprockets 39 Tooth Rear Sprocket JTR302.39

Brand: JT Sprockets. Position: Rear. Tooth Count: 39. JT Part Number: JTR302.39. Type: Standard. Material: Steel. Fitment: Direct replacemen...

TourMax Regulator Rectifier Honda 31600-MEJ-J01

SH689EA. Made in Japan. Replacement aftermarket part for Honda OEM 31600-MEJ-J01. Regulator/Rectifier Fitting InstructionsWhen on test, 12 V...

Reed Valve Honda 18601-KEA-741

Replacement aftermarket part for Honda OEM 18601-KEA-741.

All Balls 56-133-1 Fork Oil Seal & Fork Dust Seal Kit

Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...

47mm x 28mm x 7mm Wheel Oil Seal

Outer diameter 47mm. Inner diameter 28mm. Width 7mm. Note: This seal has a 47.0 mm outer diameter. OEM spec is 47.2 mm. Please confirm fitme...

12mm x 17mm Rear Sprocket Locking Flange Nuts

Thread 12mm. Spanner size 17mm.

12V T6.5 1.7W Medium Capless Wedge Side Light Bulbs Base 5mm

Voltage: 12v. Wattage: 1.7w. Base width: 5mm. Width of glass: 6.5mm. Maximum length: 21.8mm. Uses of Medium T6.5 Capless Wedge Bulbs. Medium...

38mm Brake Caliper Piston Seal Kit

Piston outer diameter 38mm. This kit contains an inner oil seal and an outer dust seal. Fit Japanese bikes only unless stated otherwise. Rep...

IRIS 530-HTP114 Gold O-Ring Drive Chain

Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...

43.6mm x 41.6mm x 30mm x 1mm Inner Slide Fork Bushings

Upper or Lower depending on whether standard or USD forks. Outer diameter 43.6mm. Inner diameter 41.6mm. Width 30mm. Thickness 1mm.

TourMax SSH903R SSH903 Steering Head Taper Bearing Kit

Includes seals. Made in Japan. This kit includes the following bearings: Bearing 1: ID 26mm x OD 47mm x Thickness 15mm. Bearing 2: ID 30mm x...

RK 530-114L XSOZ1 RX-Ring Heavy Duty Gold Drive Chain

Suitable for Sport, Touring and Off-Road Use. RX-Ring Chain. Standard Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 2...

Choke Cable - 013594

Top outer length: 780mm. Top free inner length: 93mm. Top fitting: 45' bend, 8mm thread. Bottom 1 fitting: 8mm-6mm tapered ferrule. Top nipp...

TourMax Clutch Slave Cylinder Kit 22864-MEJ-003 04121-MEJ-315

Small seal outer diameter 18mm. Large O-rings outer diameter 36mm. Spring length 22.50mm. Made in Japan. Replacement aftermarket part for Ho...

TVH 530-114 Heavy Duty Drive Chain

This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...

IRIS 530FB-114 Gold X-Ring Drive Chain

Comes with rivet link, no split link but these can be found under split links via search. This final drive chain is the correct length and p...

20.80mm x 55.20mm x 2.80mm Clutch Springs

Outer diameter 20.80mm. Length 55.20mm. Thickness 2.80mm. Heavy duty clutch springs.

Alloy Brake Lever - 014416

14 Tooth Front Sprocket - 003200

Steel sprocket. Replaces JT Sprockets JTF339-14.