Brand cross reference: Vesrah VD254, VD925; 115; Ferodo FRP405; SBS 559. You may need more than a single pair of pads if you have twin discs...
Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Suitable for S5E S5T and S5N Franco Morini engines with two bolt holes in the intake manifold gaskets. This engine gasket set contains most ...
Made for future champions, the 420NZ3 is the premium 420 sized racing chain. This is also a great option for smaller bikes such as the Honda...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
Thread 14mm x hex 13/16" x pitch 1.25mm. Heat range 6. Reach 12.7mm (1/2"). Standard 2.5mm copper core centre electrode. 0.7-0.8mm...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 43.00mm. Gudgeon pi...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 42.00mm. Gudgeon pi...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 47.00mm. Gudgeon pi...
These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 40.00mm. Gudgeon pi...
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Steel sprocket. Replaces JT Sprockets JTF240-11.
