Suitable for fork seals with 56mm outer diameter. Thickness 1.8mm. This will suit the following models as well as those listed in fitments: ...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
This oil filter remover will only fit filters supplied by Motorcycle Products.
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Length: 37" (940mm). Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square/fork. Note: For a longer speedo cable use 41&...
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Fits 8mm (5/16") inner diameter fuel line. Filter Inlet OD: 8.5mm. Filter Outlet OD: 8.5mm. Filter Inlet ID: 6mm. Filter Outlet ID: 6mm...
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Use with our SKU: 006904. Includes push rod, bushing and boot. Brass bush outer diameter 10mm. Brass bush length 10mm. Rod length 41.25mm. M...
Kit contains a pair of fork dust seals.
This will suit the following models as well as those listed in fitments: Arctic Cat 600 4x4 LE 2004. Arctic Cat 600 4x4 2004. Arctic Cat 650...
Outer diameter: 22mm. Inner diameter: 12mm. Width: 5.5mm. Replacement aftermarket part for for the following OEM numbers: Kawasaki 92049-122...
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
Outer diameter 22mm. Inner diameter 13mm. Width 5mm.
Replacement aftermarket part for the following OEM numbers: Honda 34903-388-611, 34903-KCS-920. and many more TBA.
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
Outer diameter: 37.5mm. Inner diameter: 32mm. Width: 26mm. Replacement aftermarket part for the following OEM numbers: Honda 18391-ML8-000. ...
Outer diameter 14mm. Length 39mm. Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 22886-MB0-305. Kawasaki ....
Please note: these mirrors have a plastic body with metal stem. Both mirrors have right hand thread. Glass outer diameter 110mm. 140mm stem ...
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. Each kit contains an inner oil seal...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Suzuki OEM 59313-36500.
Please Note: These are not suitable for flat sided Keihin carbs. Made in Japan.
Thread diameter 49mm. Supplied with diaphragm. Made in Japan.
