Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
12V 21/5W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a clear glass bulb head and is suitable ...
Length: 37" (940mm). Clock fit: screw-over 11mm. Wheel end: screw-over 11mm. Type: square/fork. Note: For a longer speedo cable use 41&...
Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Outer diameter: 22mm. Inner diameter: 12mm. Width: 5.5mm. Replacement aftermarket part for for the following OEM numbers: Kawasaki 92049-122...
Suitable for fork seals with 56mm outer diameter. Thickness 1.8mm. This will suit the following models as well as those listed in fitments: ...
Amber version: For clear version use our SKU: 018213. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Outer diameter 14mm. Length 39mm. Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 22886-MB0-305. Kawasaki ....
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Use with our SKU: 006904. Includes push rod, bushing and boot. Brass bush outer diameter 10mm. Brass bush length 10mm. Rod length 41.25mm. M...
Outer diameter 22mm. Inner diameter 13mm. Width 5mm.
Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, 34901-MC7-602, 34901-MAK-000, 34901-MC7-601,...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Kit contains a pair of fork dust seals.
Fits 8mm (5/16") inner diameter fuel line. Filter Inlet OD: 8.5mm. Filter Outlet OD: 8.5mm. Filter Inlet ID: 6mm. Filter Outlet ID: 6mm...
This oil filter remover will only fit filters supplied by Motorcycle Products.
12V 23/8W stop and tail rear light bulb with BAY15D double contact cap and staggered pins. Features a small clear bulb head and is suitable ...
This will suit the following models as well as those listed in fitments: Arctic Cat 600 4x4 LE 2004. Arctic Cat 600 4x4 2004. Arctic Cat 650...
12v H4 Halogen Headlight Bulb: Tinted Blue. Replacement aftermarket part for the following OEM numbers: Honda 34901-KY2-701, 34901-KY2-702, ...
Upper or Lower depending on whether standard or USD forks. Outer diameter 45mm. Inner diameter 41mm. Width 14.9mm. Thickness 2mm.
Thread: 12mm. Pitch: 1.50mm. Width of head: 17mm spanner. Thread length: 9mm. Magnet length: 2.5mm. Replacement aftermarket part for the fol...
Replacement aftermarket part for the following OEM numbers: Honda 34903-388-611, 34903-KCS-920. and many more TBA.
Clear version 12V 10W BA15s: SKU: 018209. Replacement aftermarket part for the following OEM numbers: Yamaha 1JD-H3311-00-00, 5SK-H3311-00-0...
Please Note: These are not suitable for flat sided Keihin carbs. Made in Japan.
Please note: these mirrors have a plastic body with metal stem. Both mirrors have right hand thread. Glass outer diameter 110mm. 140mm stem ...
Thread diameter 49mm. Supplied with diaphragm. Made in Japan.
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. Each kit contains an inner oil seal...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Suzuki OEM 59313-36500.
Outer diameter: 37.5mm. Inner diameter: 32mm. Width: 26mm. Replacement aftermarket part for the following OEM numbers: Honda 18391-ML8-000. ...
