4 wires with bullet connectors. 2 keys included.
As: RC19-032. Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating...
Single bolt hole mount. Outer diameter 90mm. 116 dB. All buyers please be aware that all horns/hooters supplied by us are marked but not nec...
Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...
Resistors are built into the relay, you just have to make sure you earth relay with the attached wire. For use with all LED indicators. Rect...
Fits NGK D series plugs with threaded terminals. Straight type. 10-12mm. 5 kilo ohm. Terminal stud. Special waterproof cover. Water resistan...
Brake light switch with lead. Lead length 54cm. Female block connector. Replacement aftermarket part for Yamaha OEM 1AA-83980-00-00, 2U2-839...
Please Note: HT lead for V-Twins on rear cylinder like the GV700 will require longer lead use SKU: 023734 which is one metre of 7mm. 12v ign...
Fits NGK B series plugs with threaded terminals. 120 degree elbow long type. 14mm. 5 kilo ohm. Terminal stud. Water resistant, vibration res...
This LED flasher relay will fit your bike even though your original may be rectangle in shape where as this one is round but it has the exac...
Clutch switch with lead. 2 wires with bullet connectors.
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 6. 12.7mm (1/2") reach. 0.6mm fine wire iridium centre ...
69mm between bolt hole centres. 4 pins. Made in Japan. Replacement aftermarket part for Yamaha OEM 3TJ-81960-01, 3TJ-81960-02, 3TJ-81960-00....
Please Note: RF900 models 1994-98 use one of two relays so check the images as you may require our SKU: 006171 or upgrade to TourMax SKU: 03...
AC for bikes without a battery. Single bolt hole mount. Outer diameter 100mm. 116 dB. All buyers please be aware that all horns/hooters supp...
12V 14AH CCA 200A. Length: 150mm x Width: 87mm x Height: 146mm. Absorbed Glass Mat Technology. The perfect battery for Motorcycles, ATV's, P...
45 degree brake light switch with lead. 2 wires with bullet connectors. Comes with spring. Replacement aftermarket part for Yamaha OEM 1A0-8...
6 wires with male spade block connector. 2 keys included.
Complete ignition unit manufactured to OEM specifications consisting of integrated CDI and ignition coil for geared bikes with Ducati or Kok...
Thread 10mm x hex 5/8" (16mm) x pitch 1.00mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. Half thread (12.7mm threaded). 0....
Replacement aftermarket part for the following OEM numbers: Arctic Cat 3530-013, 3530-015. CFMoto 5270-150500, 7020-150310. Honda 35850-ZJ1-...
Clutch switch with lead. Lead length 54cm. Female block connector. Replacement aftermarket part for Yamaha OEM 3YF-83980-00.
Single bolt hole mount. Outer diameter 90mm. 100 dB. All buyers please be aware that all horns/hooters supplied by us are marked but not nec...
Resistors are built into the relay, you just have to make sure you earth relay with the attached wire. For use with all LED indicators. As f...
4 wires with male spade block connector. 2 keys included.
Brake light switch with lead. Lead length 440mm. Female block connector. Replacement aftermarket part for Honda OEM 35350-MWO-600. This part...
