IMPORTANT - Please Note: The HT lead is only 170mm in length and for many models you will need a meter of our 7mm HT lead SKU: 023734 or 5 m...
Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 30250-041-004, 30250-035-005. and many more TBA.
As: RC19-032. Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating...
Right hand handlebar switch. Lights on-PO-off and engine run-off switches. 5 wires. Fits 7/8" handlebars.
Fits NGK D series plugs with threaded terminals. 102 degree elbow. 10-12mm. 5 kilo ohm. 70mm from end to elbow. Terminal stud. Replacement a...
Please Note: HT lead for V-Twins on rear cylinder like the GV700 will require longer lead use SKU: 023734 which is one metre of 7mm. 12v ign...
50 pieces of each type.
Replacement for FEW H37; DH29; Honda OE 30202-035-004, 30202-041-005.
Please Note: There are no wiring instructions. Left hand handlebar switch. Lights high-low, indicator and horn switches. 30mm wide. Fits 7/8...
Ring inner diameter 6mm.
2 spade connectors. Does not come with spring. Replacement aftermarket part for the following OEM numbers: Honda 35350-166-003, 35350-166-00...
69mm between bolt hole centres. 4 pins. Made in Japan. Replacement aftermarket part for Yamaha OEM 3XC-81960-00, 1JK-81960-A0, 1JK-81960-A1,...
Replacement for DH-45, H85. Pivot pin length 25mm. Replacement aftermarket part for Yamaha OEM 443-81321-10. These will also fit a Yamaha DT...
Replacement aftermarket part for for the following OEM numbers: Yamaha 207-81326-10-00, 207-81326-90-00. and many more TBA. This will suit t...
Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 9. 19mm (3/4") reach. Standard 2.5mm copper core centre...
Type: PMDD. Voltage: 12 volts. Rotation: clockwise. Teeth/splines: 10. Arrowhead SND0744. Replacement for Denso 128000-8630, Triumph 1310000...
Overall length 128mm. Replacement aftermarket part for Yamaha OEM 5SL-82310-20.
Right hand handlebar switch. Lights on, high-low and kill switches. 6 wires. 20mm wide. Fits 7/8" handlebars.
Fits NGK D series plugs with threaded terminals. Straight type. 10-12mm. 5 kilo ohm. Length 77mm. Terminal stud. Water resistant, vibration ...
Made in Japan. Replacement aftermarket part for the following OEM numbers: Honda 30250-273-000, 30250-369-004, 30280-292-672, 30280-371-000,...
Ring inner diameter 8mm.
Replacement for FEW D48R and Daichi DN33R
Single bolt hole mount. Outer diameter 85mm. 100 dB. Made in Japan. All buyers please be aware that all horns/hooters supplied by us are mar...
Left hand handlebar switch. Lights high-low, indicators, horn and pass switches. 8 wires. 45mm wide. Fits 7/8" handlebars.
Replacement for FEW D48L and Daichi DN33L
Chrome front with black body. Outer diameter 90mm. 116 dB. All buyers please be aware that all horns/hooters supplied by us are marked but n...
