Motorcycle Engine & Clutch Parts

Cylinder Head - 008606

9.50mm x 2.75mm Tappet Engine Valve Shims (x5)

Outer diameter 9.50mm. Thickness 2.75mm.

Crankshaft - 008540

10mm x 12mm x 1.50mm Magnetic Oil Drain Sump Plug

Thread 10mm. Length 12mm. Pitch 1.50mm.

20mm x 16mm x 18mm Small End Bearings (x5)

Outer diameter 20mm. Inner diameter 16mm. Length 18mm.

51.50mm Piston Rings - 009356

Outer diameter 51.50mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...

1/2" x 20mm Magnetic Oil Drain Sump Plug

Thread 1/2". Pitch 20mm.

40.3mm Barrel & Piston Kit

Includes the cylinder head and top end gaskets.

19.50mm x 50.00mm x 2.60mm Clutch Springs

Outer diameter 19.50mm. Length 50.00mm. Thickness 2.60mm. Heavy duty clutch springs.

Top End Gasket Set - 011042

58.90mm Piston Rings

Outer diameter 58.90mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...

48.00mm Piston Kit - 008832

Bore size 48.00mm. Gudgeon pin outer diameter 12mm. Crown height 20mm. Piston length 52mm. Ring peg position 23.5mm. 2 stroke. Without ports...

Top End Gasket Set - 010826

57.50mm Piston Rings - 009439

Outer diameter 57.50mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...

8mm x 20mm x 1.25mm Magnetic Oil Drain Sump Plug

Thread 8mm. Length 20mm. Pitch 20mm.

29.50mm x 2.15mm Tappet Engine Valve Shims (x5)

Outer diameter 29.50mm. Thickness 2.15mm.

Crankshaft - 008534

47.50mm Piston Kit - 008817

Bore size 47.50mm. Gudgeon pin outer diameter 12mm. Crown height 20mm. Piston length 52mm. Ring peg position 23.5mm. 2 stroke. Without ports...

42mm x 25mm x 1mm Crank Thrust Washer

Outer diameter 42mm. Inner diameter 25mm. Thickness 1mm. Material: Alloy.

56.5mm Standard Barrel & Piston Kit Honda CG125 (Most Models)

See fitments for the CG125 models this barrel & piston kit fits. Includes head and base gasket. 56.5mm piston . 125cc (124 cm3) standard...

17.70mm x 43.00mm x 2.50mm Clutch Springs

Outer diameter 17.70mm. Length 43.00mm. Thickness 2.50mm. Heavy duty clutch springs.

Clutch Springs 22401-KT2-000 22401-MR5-672 92144-1160

Outer diameter: 19.50mm. Length: 37.00mm. Thickness: 2.60mm. Heavy duty clutch springs. Replacement aftermarket part for the following OEM n...

35mm x 10mm x 11mm Water Pump Bearing - 007979

Koyo 6300CM. Outer diameter 35mm. Inner diameter 10mm. Width 11mm. Made in Japan.

30mm x 19mm x 5mm Camshaft Oil Seal

Outer diameter 30mm. Inner diameter 19mm. Width 5mm.

41.50mm Piston Kit - 008731

These piston kits do not have Dyke rings but your bike will run perfectly fine with the supplied square rings. Bore size 41.50mm. Gudgeon pi...

49.00mm Piston Rings

Outer diameter 49.00mm. 2 stroke. Note: If ordering STANDARD rings these will only fit pistons supplied by us. They will not fit the origina...

47mm Barrel & Piston Kit - 008090

Includes top end gaskets. Approx 65cc.

Crankshaft - 008553

TourMax SC0412H/82RH2015 x 126 Timing Cam Chain

Endless cam chain. Length: 126 links. Pitch: 6.35mm. Width between guides: 7.15mm. Overall width: 10.3mm. Made in Japan. Fitting Endless Cam...

57.5mm Barrel & Piston Kit

Includes top end gaskets.