Motorcycle Handlebars & Controls

Brass Solderless Brake & Clutch Cable Nipples (50 Pieces)

Clutch, choke & brake cable screw and fit type nipples without the need of solder. Also known as pear or top hat type nipples. Dimension...

Tacho Cable Yamaha 1JK-83560-02 30X-83560-01 3YF-83560-01 3AJ-83560-01 1VJ-83560-01

Length: 34.5" (885mm). Clock fit: screw over 11mm. Tacho drive end: push in 19mm. Inner type: square/square. Replacement aftermarket pa...

Heated Handlebar Grips Control Unit for 014274

1" Sundance O-Ring Type Handlebar Grips

Fit 1" handlebars.

Black 7/8" Bar-End Style Handlebar Grips

Length is the total length of each grip. Length 130mm. Both grips are 7/8" inner diameter.

Assorted Cable Rubber Boots Kit

Assorted kit of various rubber cable boot covers and end sections for making up motorcycle cables. The kit contains what you see in the imag...

Black 7/8" Aluminium Drag Straights Handlebars

Overall width: 29.5". Please do not remove the protective sock from your new handlebars until you are 100% certain that they are suitab...

Black Diamond Cut Style Handlebar End Caps Aluminium Bars 13mm

Fits aluminium 7/8" handlebars with a 13mm inner. Designed to protect your handlebars and grips in the event of a spill. Easy installat...

Foam 1" Handlebar Grips

Length is the total length of each grip. Length 130mm. Fit 1" handlebars. Open ends for your bar ends or weights.

Purple 7/8" Engraved Aluminium Handlebar Grips with Chrome End Caps

Length is the total length of each grip. Length 135mm. Fit 7/8" handlebars.

Red Handlebar Cable Adjuster for 8mm Cable

Can be used as clutch and front brake cable adjuster. Aluminium. Takes an 6mm OD cable end. Knurled and slotted nut for adjustment. Thread l...

8mm Cable Ferrules for Brake Cable SKU 013454 SKU 013455

Suitable for 8.00mm OD outer brake cable. Outer diameter 7.5mm. Inner diameter 7.2mm. Length 14.50mm.

7/8" Bar End Type Heated Handlebar Grips

Length is the total length of each grip. High, low and off settings. Fit 7/8" handlebars.

Honda 46500-KB4-000 Rear Brake Foot Pedal

Replacemet for Honda OE 46500-KB4-000. 16mm bore size. 300mm between bore and toe plate centres.

Gear Lever Rubbers 24781-371-000 92161-2392 92075-1585 (5 Pcs)

Oval fitting open slot ends. Slot ID Length: 18.5mm. Slot ID Depth: 9mm. Replacement aftermarket part for the following OEM numbers: Honda 2...

Throttle Sleeve Twist Yamaha 22W-26243-00 322-26243-00

Replacement aftermarket part for Yamaha OEM 22W-26243-00, 322-26243-00. This will suit the following models as well as those listed in fitme...

Black Short Front Brake & Clutch Lever Set

Ex-Up Power Valve Cables YZF-R1 1998-01 4XV-1130E-00 4XV-1130E-01

Exhaust valve cable assembly pulley set. Replacement aftermarket part for the following OEM numbers: Yamaha 4XV-1130E-00-00, 4XV-1130E-01-00...

6mm x 6.5mm Barrel Type Cable Nipples

Outer diameter 6mm. Length 6.5mm.

135mm Leather 1" Handlebar Grips with Chrome Ends

Length is the total length of each grip. Length 135mm. Fit 1" handlebars.

1" Handlebar Throttle Unit for British Bikes

Complete alloy throttle unit.

Red 7/8" Scott Type ATV Handlebar Grips

Both grips are 7/8" inner diameter.

Kickstart Shaft, Springs & Pinion (Longer Version)

6mm x 5.25mm x 9.45mm Cable Ferrules

Outer diameter 6mm. Inner diameter 5.25mm. Length 9.45mm.

Convert Inner Cable Pear Nipple to (Split) Barrel Nipple (50 Pcs)

Converts inner cables with fixed pear nipples to barrel nipples as used on hand control levers. Suitable for cable ends with a pear nipple s...

1.50mm x 50 Metre Throttle Cable Inner

Length 50 metres.

Tacho Cable - 016007

Length: 32.5" (825mm). Clock fit: screw over 11mm. Tacho drive end: screw over 15mm. Inner type: square/square.

7/8" Handlebar Throttle Assembly for Yamaha 50cc to 100cc Trail Bikes

Takes 10mm cable. Throttle sleeve for this assembly - SKU: 015884.

Blue Diamond Cut Style Handlebar End Caps For Aluminium Bars 13mm

Fits aluminium 7/8" handlebars with a 13mm inner. Designed to protect your handlebars and grips in the event of a spill. Easy installat...

Chrome 7/8" Handlebars 4" Rise & Holes for Wiring Honda CB750K

Overall width: 31.5". Rise: 4". Centre width: 6". Comes with holes for wiring. Honda CB750 K bars with 2.5" rise use SKU...