Outer length: 930mm. Outer top fitting: standard ferrule. Outer bottom fitting: 8mm adjuster. Inner overhang: 67mm. Inner top nipple: barrel...
Length: 30" (760mm). Clock fit: screw over 11mm. Tacho drive end: push in 15mm. Inner type: square/spade.
Top outer length: 840mm. Top free inner length: 52mm. Top fitting: 90' bend, 20' side bend, housing locking tabs. Bottom 1 fitting: standard...
Developed and used by top MXGP riders. Made from ultra strong and lightweight 7075-T6 aluminium. Patented taper-wall construction with cross...
Replacement aftermarket part for for the following OEM numbers: Aprilia AP8113992, AP8133510, AP8153007. Moto Guzzi 854603, 981050. Yamaha 5...
Top 1 outer length: 960mm. Outer top 1 fitting: 45' bend, 10mm adjuster. Outer bottom 1 fitting: 6mm adjuster. Top 1 inner overhang: 101mm. ...
Overall width: 34". Centre width: 7". Pull back: 8". Rise: 16". Height: 10". Diameter: 7/8". Colour: Chrome. K...
10mm spline size. 110mm length, which is a vertical straight line from inside centre of spline to the inside centre of toe peg.
Note: Not identical to the original but we have been made aware that this kickstart lever fits the ZR50. Shaft size 13mm. Replacement afterm...
Overall width: 32". Centre width: 8". Pull back: 8". Rise: 6". Diameter: 1". Colour: Chrome. Knurls: No. Black end ...
Length: 37" (940mm). Longer 40" cable: SKU: 015949. Clock fit: screw-over 11mm. Wheel end: screw-in 15mm external thread. Type: sq...
Alloy version of the same lever SKU: 015022. Replacement aftermarket part for the following OEM numbers: Triumph T2040350. Yamaha 4FM-83912-...
Replacement aftermarket part for the following OEM numbers: Kawasaki: 13236-1346, 13236-0070. Suzuki: 57310-37F00. Yamaha: 5MV-83922-00-00. ...
Overall width: 36". Centre width: 10". Rise: 5". Diameter: 1". Colour: Chrome. Knurls: Yes. Black end caps. With dimples...
TUV approved. Made from ultra strong and lightweight 7075-T6 aluminium. Patented taper-wall construction. 28.6mm clamping area diameter. Ano...
Fits 7/8" handlebars. Replacement for Aprilia OE 8118075.
Length: 50" (1270mm). Clock fit: screw-over 11mm. Wheel end: push-in 10mm gun sight screw. Type: square/fork.
18mm bore size. 140mm length, which is a vertical straight line from inside centre of bore to the inside centre of toe peg.
Shaft size 14mm.
Replacement aftermarket part for Honda OEM 53178-422-020, 53178-MC3-700, 53178-MA6-000, 53178-MF8-000
Replacement aftermarket part for Honda OEM 45450-402-000, 45450-402-010.
Outer length: 980mm. Outer top fitting: standard ferrule. Outer bottom fitting: 8mm adjuster. Inner overhang: 85mm. Inner top nipple: barrel...
Some bikes have one single pull throttle cable while others have two which are: Throttle Cable A or 1 = (Pull). Throttle Cable B or 2 = (Pus...
Note: Some GSF400 Bandit 1991-93 models use a push-in type cable at wheel therefore use our SKU: 015943. Length: 36" (920mm). Clock fit...
Top 1 outer length: 1060mm. Outer top 1 fitting: 10mm adjuster. Outer bottom 1 fitting: standard ferrule. Top 1 inner overhang: 143mm. Addit...
Finish: Black. Alloy Version use our SKU: 014404. Replacement aftermarket part for the following OEM numbers: Honda 53175-ML3-790. and many ...
Top outer length: 865mm. Top free inner length: 67mm. Top fitting: 18mm thread. Bottom 1 fitting: standard ferrule. Top nipple: pull choke. ...
