FREE DELIVERY ON ORDERS OVER £175 CHECK TERMS & CONDITIONS
US Powersports

US Powersports US2.5L AGM Sealed Battery YB25LC VP2.5-3 GM2.5A-3C

£14.40
Includes 20% VAT
In Stock
This product fits the Honda XL125 S 1984 model.
Manufacturer: US Powersports
Pack size: Each
SKU: 023760

Share:  

US Powersports US2.5L AGM Sealed Battery YB25LC VP2.5-3 GM2.5A-3C

Brand update notice: US Powersports batteries are in the process of being re‑branded as MTX. While existing US Powersports branded stock remains, this may still be supplied. Once current stock is depleted, these UPS batteries will be supplied under the MTX brand. The battery itself is identical in specification, performance, and reliability, with no changes to materials or manufacturing. Only the branding and external casing have changed, and all listings remain fully compatible as described.

  • 12V 2.5AH
  • Length: 80mm x Width: 70mm x Height: 106mm
  • Replaces: 50311, 6M2P, BB2.5L-C, CB2.5L-C, EB2.5L-C2, FB2.5L-C, GM2.5A-3C, JMB25LC, MB2.5U, US2.5, VP2.5-3, YB2.5L-C, YB25LC
  • Absorbed Glass Mat Technology
  • The perfect battery for Motorcycles, ATV's, Personal Watercraft and Snowmobiles
  • Maintenance free never needs water
  • No initial charging required
  • Install and Go
  • Non-spillable battery
  • 1 year warranty

Charging the US Powersports US2.5L

We highly recommend charging your AGM battery every 6 weeks when your machine is rarely used, or to help keep your battery in good health, with one of our battery chargers that has a built in maintainer.

The worst thing you can do to a battery is start your machine every now and then in an attempt to keep it topped up. This often leaves the battery partially discharged, which will have a negative effect on both performance and battery life.

If you must use a trickle charger, do not leave your AGM battery on charge all the time. Let the battery discharge slightly between charges, but never below 12.2V, as this will damage the battery and shorten its life. You can use one of our trickle chargers designed specifically for AGM batteries, but even then, remove it from trickle charge from time to time and follow the advice below.

Your battery comes to you pre-conditioned and ready to install straight out of the box. You do not need to add acid, however due to storage variations in the supply chain, you should always place the battery on a suitable AGM charger before fitting.

Draining a battery through parasitic loads is the number one cause of battery failure, and once taken below 8V it can be very difficult for the battery to recover.

Many bike owners do not realise the strain a modern battery can face due to sophisticated electronics and constant low level power draw.

We recommend one of our chargers, as they are all suited for AGM batteries. This will help keep your battery in the fully charged state it was designed for.

Please read more here Battery Care and FAQs, which applies to all batteries supplied by Motorcycle Products.

Your AGM battery still needs looking after, even though it is classed as maintenance free. Please take a moment to read the advice, as it may surprise you and will help extend the life of your battery.

Motobatt Installation Guide

Before You Place Your Order...
  1. Note the image may not be exactly as item received and any slight difference will not be inferior or effect performance
  2. Check the fitment list to ensure this item will fit your vehicle
  3. When we refer to right or left, this is as you sit on your vehicle
  4. To find part by SKU, enter the number without "SKU" into the search box
  5. Products containing any fluid or hazardous materials, aerosols, batteries including large lithium jump starters cannot be shipped overseas due to courier restrictions although we can ship UK offshore and Scottish Highlands at higher shipping rates
  6. EU customers should check with your countries customs office to determine what additional costs such as tax or Import duties will be prior to purchasing. These charges are normally collected by the delivery company or when you pick the item up, they are not included in the item price or shipping charge on this website

All parts and accessories are brand new and include VAT where applicable.
Most parts are pattern or aftermarket although some will be genuine but are not always stated as being so.
The use of motorcycle manufacturers' names is for reference purposes only. We do not imply that the products we sell are made by or with the permission of the names listed.

Tuareg 125 Freno Disco 1987
Tuareg 125 Rally 1987
CB125 RS 1983-86
CB125 S 1984-85
CG125 (Kick Start) 1997
CG125 BR Brazil 1984-97
CG125 M1/1 (Kick Start) 2003
CG125 W (Kick Start) 1998-01
MTX50 S 1982-86
XL125 S 1984

You May Also Like

Ignition Switch Bracket for 006790 & 006791
Pack size: Each SKU: 006589

£9.90

View Details
WRP 79-1101 Starter Solenoid Rebuild Kit
Pack size: Each SKU: 035114

£33.05

View Details
WRP 79-3002 Battery Cable Kit Clear
Pack size: Each SKU: 034557

£40.90

View Details
150mm x 28mm Yamaha FS1 Battery Strap
Pack size: Each SKU: 004882

£3.60

View Details
10mm Honda Clutch Switch
Pack size: Each SKU: 006479

£5.85

View Details
Black 7mm x 5 Metre HT Lead
Pack size: Each SKU: 005076

£4.65

View Details
WRP 80-1013 Starter Motor 1.4 Black
Pack size: Each SKU: 035099

£330.90

View Details
TourMax 8mm x 1.25mm Oil Pressure Switch
Pack size: Each SKU: 006807

£13.70

View Details