If you're working on a vintage or classic motorcycle and the original air filter isn’t available anymore, our foam air filter sheets can b...
Koyo 6204. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan.
On, off and reserve positions. 34mm between bolt hole centres. 5mm side outlet. Takes pipe with a 5mm inner diameter.
Outer diameter 40mm. Inner diameter 32mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Outer diameter: 110mm. Width: 25mm. How to measure drum brake shoes: Outer Dimension: Preferably use a caliper although a tape measure would...
175mm approx length.
Non-Sealed economical chain for light displacement CC for daily use. Made in Japan. Specifications Plate thickness (inner): 1.45. Plate thic...
Outer diameter 26mm. Inner diameter 15mm. Width 6mm.
Non-asbestos. Outer diameter 40mm. Inner diameter 31mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Koyo 6301DDU. Double sided rubber sealed. Outer diameter 37mm. Inner diameter 12mm. Width 12mm. Made in Japan. Replacement aftermarket part ...
On some models that use two oil seals on the gear shift arm, this is the first seal that goes with an inner diameter of 12mm. Outer diameter...
Inner diameter 26mm. Outer diameter 37mm. Thickness 10.5mm.
Includes RJ Split Link - RJ type links are what we call a loose-clip type link. The side plate may be pressed on and the clip will slide int...
Outer cable length 1970mm. Inner cable length 1140mm. Overhang 70mm. Replacement aftermarket part for Yamaha OEM 443-26341-00, 443-26341-01.
Fitted with 12V 25/25W MPF bulb. Bulb holder SKU: 018114. 4.5" is the full width of glass. Maximum width: 135mm. OD of visible glass on...
Inner diameter 26mm. Outer diameter 37mm. Thickness 14.5mm.
Top outer length: 980mm. Top free inner length: 62mm. Top fitting: standard ferrule. Bottom 1 fitting: standard ferrule. Top nipple: 6mm x 4...
Suitable for motorcycles up to 175cc. 280mm centre to centre of bolt holes. Maximum OD 50mm. Top pin hole ID 10mm - width 18mm. Bottom pin h...
Straight TR4 valve. Same as 90/80-R17. Replacement aftermarket part for the following OEM numbers: Honda 42712-GS4-006, 42712-041-154, 42712...
Fully covered. Suitable for motorcycles up to 200cc. 280mm centre to centre of bolt holes. Total length 310mm. Maximum OD 45mm. No adjustmen...
Koyo 6300DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 10mm. Width 11mm. Made in Japan.
Reinforced Heavy Duty Chain. Off Road Racing Use (MX/SX). Non-Sealed Chain. Made in Japan. Specifications Plate thickness (inner): 1.80. Pla...
This fuel cap does not fit the CB125 J & S 1976 models. Locking version. Outer diameter of the cap body that sits over the tank filler n...
Length 150mm. Width 28mm. As fitted to Yamaha FS1, FS1E.
Outer diameter 40mm. Inner diameter 28mm. Width 8mm. This will suit the following models as well as those listed in fitments: Right Hand Sid...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. This may not be the most suitable grade of fin...
Outer diameter 35mm. Inner diameter 20mm. Width 7mm.
