27mm tapering down to 14mm. Length 32cm. Suitable replacement part for Yamaha Fizzy OEM numbers: 348-14753-00, 296-14753-02.
175mm approx length.
Outer diameter 40mm. Inner diameter 32mm. Depth 5mm. Copper Exhaust Header Gaskets otherwise known as Crush Gaskets fit with flat side of th...
Double filter screen. If you have an old bike and can't find an air filter for it, you can often make a copy of the original with our air fi...
Replacement front fork gaiters suitable for the Yamaha FS1-E and many other models with similar fork dimensions. Rubber compound for water r...
This final drive chain is the correct length and pitch for standard factory fitted sprockets. Comes with a split link only. This may not be ...
Non-asbestos. Outer diameter 40mm. Inner diameter 31mm. Alloy Fibre Exhaust Header Gaskets are two aluminium bands with compressible paper f...
Outer diameter 110mm. Width 25mm. How to measure drum brake shoes: Outer Dimension: Preferably use a caliper although a tape measure would g...
On some models that use two oil seals on the gear shift arm, this is the first seal that goes with an inner diameter of 12mm. Outer diameter...
Koyo 6204. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan to OEM specification.
This chain comes with a split link. This final drive chain is the correct length and pitch for standard factory fitted sprockets. Super Rein...
This kit includes the following parts: Con rod. Gudgeon pin. Big end and small end needle bearings. Pair of thrust washers.
On, off and reserve positions. 34mm between bolt hole centres. 5mm side outlet. Takes pipe with a 5mm inner diameter.
Fitted with 12V 25/25W MPF bulb. Bulb holder SKU: 018114. 4.5" is the full width of glass. Max width: 135mm. Max depth: 120mm. No side ...
Replacement for FEW M48, M76, D92; Daiichi DM78, M76, DM79K, DH31, DN52, DM69; Honda OE 30202-041-015; Yamaha OE 1K8-81321-20, 120-81321-20,...
Outer diameter 4.8mm. Length 117.5mm. Replacement part for Yamaha OEM 257-16357-00.
Outer diameter 14.50mm. Length 36.00mm. Thickness 2.00mm. Heavy duty clutch springs.
Straight TR4 valve. Same as 90/80-R17. Replacement part for the following OEM numbers: Honda 42712-GS4-006, 42712-041-154, 42712-052-009.
Length 150mm. Width 28mm. As fitted to Yamaha FS1, FS1E.
Koyo 6301DDU. Double sided rubber sealed. Outer diameter 37mm. Inner diameter 12mm. Width 12mm. Made in Japan to OEM specification. Replacem...
Fully covered. Suitable for motorcycles up to 200cc. 280mm centre to centre of bolt holes. Total length 310mm. Maximum OD 45mm. No adjustmen...
Inner diameter 26mm. Outer diameter 37mm. Thickness 10.5mm.
Suitable for motorcycles up to 175cc. 280mm centre to centre of bolt holes. Maximum OD 50mm. Top pin hole ID 10mm - width 18mm. Bottom pin h...
Inner diameter 26mm. Outer diameter 37mm. Thickness 14.5mm.
Koyo 6300DDU. Double sided rubber sealed. Outer diameter 35mm. Inner diameter 10mm. Width 11mm. Made in Japan to OEM specification.
