Thread 14mm x hex 3/4" (19mm) x pitch 1.25mm. Ceramic resistor. Heat range 8. 19mm (3/4") reach. 0.6mm fine wire iridium centre el...
Total lead length: 360mm. Longer lead at 630mm use our SKU: 036776. Front or rear brake light stop switch. Push in type. 8mm diameter. 2 wir...
Automatically isolates secondary (accessory) battery from primary (starting) battery. Prevents primary battery from draining when vehicle is...
Single bolt hole mount. Outer diameter 75mm. 100 dB. Made in Japan. All buyers please be aware that all horns/hooters supplied by us are mar...
Fits NGK B series plugs with threaded terminals. 90 degree elbow. 14mm. 5 kilo ohm. Terminal stud. Replacement aftermarket part for the foll...
Yellow. Up to 14mm.
Works Racing Parts (WRP)The WRP brand relies on two factors: a strong sponsorship program that endorses the name in the racing industry and ...
154mm x 80mm x 27mm. Start current: 400A. Peak current: 800A.
Works on 12v and 6v systems. If this solenoid is fitted with a fuse swap with your original if this one has a different rating. Replacement ...
Overall length: 128.5mm. TourMax: IGN-426P. Made in Japan. Replacement aftermarket part for the following OEM numbers: Kawasaki 21171-0005. ...
Outer diameter: 7mm. Length: 5 metres. Colour: black. Copper core.
Please Note: The lead length of this ignition switch is 330mm (13 inches) without a resistor. Non-resistor. Built-in resistor use our SKU: 0...
Tourmax Thermostat Fan Switch for Honda & HM-Moto. Thread: 16mm (M16). Thread Pitch: 1.50mm. Thread Length: 35mm . Single Spade Connecti...
Length 150mm. Width 28mm. As fitted to Yamaha FS1, FS1E.
6v to 12v ignition coil. 1 spade terminal. Centre-to-centre distance between mounting holes: 55mm. Body length 39mm. Single Output. HT lead ...
Thread 8mm. Pitch 1.25mm. Made in Japan. Replacement aftermarket part for Honda OEM 35500-MJ4-024, 35500-MB9-004.
12V 3.5AH CCA 60A. Length: 113mm x Width: 70mm x Height: 87mm. Absorbed Glass Mat Technology. The perfect battery for Motorcycles, ATV's, Pe...
Outer diameter 10mm. Replacement aftermarket part for Honda OEM 35330-413-003.
12v Regulator Rectifier fits many models including those using the Chinese GY6 engine. Replaces Shindengen: SH591-12, SH634-12 SH570-6, SH57...
This bracket is 74mm Long with a 49mm Dia Hole. Another switch that fits perfectly is our SKU: 006631 6 wire ignition switch with spade term...
Everything you need is included in this easy to fit buzzer kit. Simply connect the red wire to the indicator positive one side and the black...
Length 140mm. Width 25mm. Wide Enclosed Loop Ends.
Please Note: The lead length of this ignition switch is 170mm (6.75 inches). Non-resistor. 5 wires with male spade block connector. Wire len...
6V/12V 1.00A waterproof battery charger. Suitable for all battery types including AGM, gel and acid. Charges 6V and 12V batteries. Water pro...
Yellow. 9mm.
