Overall width: 34.5". Rise: from top to top of bar 12". Centre width: 9". From bend to clamp area knurl: 80mm. Knurl width: 3...
Fit 7/8" handlebars.
Shaft size 16mm.
Fits 7/8" handlebars.
Alloy Version. Black version of same lever use our SKU: 015102 . Replacement aftermarket part for the following OEM numbers: Aprilia AP82180...
Shaft size 13mm.
12mm bore size. 110mm length, which is a vertical straight line from inside centre of spline to the inside centre of toe peg.
Length is the total length of each grip. Length 130mm. Fit 7/8" handlebars.
Note: This cable is the 'pull' and it may have black or chrome ends depending on current stock. It may be possible to use this cable as the ...
Fits 7/8" handlebars. Short lever. Decompressor lever.
Note: In Black. Brembo Style. Front brake lever with spring. Polished Alloy version use our SKU: 037004. Cold-Forged Alloy version (superior...
Length: 815mm (32"). Clock fit: screw over 11mm. Tacho drive end: screw in 15mm. Inner type: square/square. Note: This rev-counter cabl...
Shaft size 14mm.
Overall width: 32". Centre width: 8". Rise: from bottom to centre of bar 4.5". Pull back: 5". With dimples & knurls. End...
Some models such as the DR-Z400 and others may need a shorter version at 980mm which is our SKU: 015944. Length: 43" (1100mm). Clock fi...
Please ensure this 35.5" cable is not too long for your Suzuki as you may require shorter as listed below. Shorter cable at 32" us...
Outer cable length: 1275mm. Outer cable top fitting: 8mm stepped ferrule. Outer cable bottom fitting: 8mm adjuster. Additional fittings info...
Overall width: 34". Without dimples. Please do not remove the protective sock from your new handlebars until you are 100% certain that ...
Length: 21" (535mm). Clock fit: screw over 11mm. Tacho drive end: screw over 15mm. Inner type: square/square.
Top outer length: 780mm. Top free inner length: 93mm. Top fitting: 45' bend, 8mm thread. Bottom 1 fitting: 8mm-6mm tapered ferrule. Top nipp...
Top 1 outer length: 770mm. Bottom 1 outer length: 495mm. Bottom 2 outer length: 280mm. Outer top 1 fitting: 45' bend, 10mm adjuster (1.00mm ...
Length is the total length of each grip. Length 120mm. Fit 7/8" handlebars.
This is the blade only in alloy to fit SKU: 014449 & SKU: 014452 Replacement for the alloy versions of the following OEM numbers: Kawasa...
Overall width: 30". Centre width: 10.5". No Knurls in clamp area. Please do not remove the protective sock from your new handlebar...
Outer cable length: 790mm. Outer top fitting: 45' bend, 6mm push in, 11mm outer diameter stop plate. Outer bottom fitting: standard ferrule....
