Length: 35" (890mm). Clock fit: screw-over 11mm. Wheel end: screw-over 10mm. Type: square/fork. Shorter cable 760mm use our SKU: 015928...
Fits our cable inner for throttle and clutch kit part number 023616.
Fits 7/8" handlebars.
Fit 7/8" handlebars.
Overall width: 32". Rise: 4". Centre width: 6". Location hole top left of bars. Reproduction Suzuki Kettle handlebars. Please...
4 Way adjustable alloy clutch lever for cable type clutch "not applicable with cruise control". Replacement aftermarket part for T...
Shaft size 16mm.
Length is the total length of each grip. Length 125mm. Fit 7/8" handlebars.
Shaft size: 13mm. Replacement aftermarket lever corresponding to the following Yamaha lever-arm references. Please check the 13mm shaft size...
Length: 815mm (32"). Clock fit: screw over 11mm. Tacho drive end: screw in 15mm. Inner type: square/square. Note: This rev-counter cabl...
Shaft size 13mm.
Length is the total length of each grip. Length 130mm. Fit 7/8" handlebars.
Fits 7/8" handlebars. Short lever. Decompressor lever.
Overall width: 34". Without dimples. Please do not remove the protective sock from your new handlebars until you are 100% certain that ...
This is the blade only in alloy to fit SKU: 014449 & SKU: 014452 Replacement for the alloy versions of the following OEM numbers: Kawasa...
Top outer length: 780mm. Top free inner length: 93mm. Top fitting: 45' bend, 8mm thread. Bottom 1 fitting: 8mm-6mm tapered ferrule. Top nipp...
Some models such as the DR-Z400 and others may need a shorter version at 980mm which is our SKU: 015944. Length: 43" (1100mm). Clock fi...
Overall width: 28". Rise: from top to top of bar 4". Centre width: 7.5". Please do not remove the protective sock from your n...
Note: This cable is the 'pull' and it may have black or chrome ends depending on current stock. It may be possible to use this cable as the ...
Outer cable length: 1275mm. Outer cable top fitting: 8mm stepped ferrule. Outer cable bottom fitting: 8mm adjuster. Additional fittings info...
Outer cable length: 1100mm . Inner cable free play: 38mm . Total cable length: 1500mm . Rod thread: M6 (6mm). Replacement aftermarket part f...
Length: 21" (535mm). Clock fit: screw over 11mm. Tacho drive end: screw over 15mm. Inner type: square/square.
Please ensure this 35.5" cable is not too long for your Suzuki as you may require shorter as listed below. Shorter cable at 32" us...
Shaft size 14mm.
Top 1 outer length: 770mm. Bottom 1 outer length: 495mm. Bottom 2 outer length: 280mm. Outer top 1 fitting: 45' bend, 10mm adjuster (1.00mm ...
