Inner diameter 41mm. Outer diameter 54mm. Thickness 11mm.
Outer diameter 47mm. Inner diameter 28mm. Width 7mm. Replacement aftermarket part for the following OEM numbers: Triumph T3600701 (Front lef...
18mm bore size. 135mm length, which is a vertical straight line from inside centre of bore to the inside centre of toe peg. Replacement afte...
Inner diameter 41mm. Outer diameter 54mm. Thickness 12.5mm.
Made in Japan. This set includes the following items: 1 x bearing OD 24mm x ID 17mm x length 26mm. 1 x shaft OD 17mm x ID 10mm x length 30mm...
Thread 10mm. Spanner size 14mm. Replacement aftermarket part for the following OEM numbers: . Honda 90304-KAE-871, 90308-357-000, 90308-382-...
Clear version: For amber version use our SKU: 018214. Glass width widest: 25mm. Metal base OD: 15mm. Total height: 47mm. P21W. Replaces HB38...
Upper or Lower depending on whether standard or USD forks. Outer diameter 41.75mm. Inner diameter 39.75mm. Width 19.8mm. Thickness 1mm. Repl...
Base: 9mm. Glass Width: 9.60mm. Glass Length:15mm.
Suitable for H4 headlight bulbs. Image is true as shown. Not suitable for all models of bike so please check the image matches the one/s in ...
Includes a pair of fork oil seals and a pair of fork dust deals. Fork oil seals: ID 41mm x OD 54mm x Thickness 11mm. Push-in type fork dust ...
Base width: 5mm. Glass width: 6.2mm. Glass length: 17.8mm.
Inner diameter 30mm. Outer diameter 55mm. Width 1.5mm. Replacement aftermarket part for the following OEM numbers: Triumph T3600063.
Piston outer diameter 30mm. Oil seal: 3.00mm wide x 3.20mm thick. Dust seal: 2.15mm wide x 2.15mm thick. Each kit contains an inner oil seal...
Please Note: This brake pad pin kit comes as shown in the image. Some kits have two pins for a brake pad and some kits only have one. Replac...
Outer diameter 20mm. Inner diameter 8mm. Length 40mm. Push-over style. Open both ends.
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. Replacement aftermarket part for Honda OEM 45133-MA3-006, 451...
Koyo 6203DDU. Double sided rubber sealed. Outer diameter 40mm. Inner diameter 17mm. Width 12mm. Made in Japan to OEM specification. Replacem...
Piston outer diameter 38mm. Piston length 31mm. This kit includes a single piston with matching internal oil seal and outer dust seal. Suita...
Thread diameter 49mm. Supplied with diaphragm, O-ring and screw. Made in Japan to OEM specification. The O-ring is not used on Suzuki models...
Replacement aftermarket part for the following OEM numbers: Honda 34901-MC7-602, 34901-MAK-000, 34901-MC7-601, 34901-KEB-620, 34901-MAK-F00....
Piston outer diameter 38mm. Each kit contains an inner oil seal and an outer dust seal. Enough seals for 5 pistons. Fit Japanese bikes only ...
Koyo 6204DDU. Double sided rubber sealed. Outer diameter 47mm. Inner diameter 20mm. Width 14mm. Made in Japan to OEM specification. Replacem...
Kit contains a pair of fork oil seals and a pair of fork dust seals. Dyno tested to last 3 to 4 times longer than OEM seals. Directional rib...
Width at base 8.80mm. Width of glass 9.60mm. Total length 24.10mm. These bulbs will also fit the number plate light on some models such as t...
Smallest of the two mechanical water pump seals fitted in mainly Suzuki models. Outer diameter 24mm/29mm. Inner diameter 11.15mm/22.5mm. Wid...
Brake caliper shaft boots are the rubber sleeves that protect the slide bolts. 22mm ID. Replacement aftermarket part for Kawasaki OEM 49006-...